2016 Land Pride RC2512

On Sale
$9,500.00
Was $9,500.00


New/Used
New
Availability
In Stock
Location
PARCS Superstore 1 - Route 50 West
VIN
SN1011808
Title
Clean
Condition
Excellent
Year
2016
Manufacturer
Land Pride
Model
RC2512

Specs

General

Working Width
12 ft.
Width
12 ft. 7 in.
Length
13 ft. 3 in.
Weight
2,540 lb.
Recommended HP
40-100 PTO hp

Overview

Dealer Insights

LIMITED QUANTITY | Serial Specific Pricing SN-1011808, SN-1029300 Call for details!

Description

Land Pride's RC2512 Rotary Cutter is designed for smaller tractors while retaining the features and benefits of larger folding cutters. The 12' width, sharp turning radius, and low tongue weight makes this an ideal Rotary Cutter for compact tractor owners that need a large rotary cutter for farm grass maintenance. The RC2512 offers a pull-type, self-leveling tongue with a clevis hitch for attachment to 40-100 HP tractors. It features a constant velocity Cat. 4 main driveline and Cat. 3 connecting drivelines with slip-clutch protection. The standard stump jumper under each blade spindle slides over stumps, rocks and debris. Front and rear single chain safety guards provide protection against thrown objects.

Features
  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures.
  • Factory assembled: Saves customer set-up time and money.
  • 160 HP Divider gearbox and 100 HP wing gearboxes: A rugged heavy built gearboxes capable of handling heavy cutting applications.
  • Gearbox Seal Protection: Gearbox bottom seal protection for longer bearing life.
  • Input driveline: Cat. 4 CV: Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
  • Easy greasable drivelines: Drivelines have access holes for greasing the U-joints and to grease the inner profiles.
  • 2 Plate slip-clutch: Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered.
  • 16,500 FPM High blade tip speed: Allows clean cutting of material and even distribution.
  • 6" Blade overlap: Eliminates skipping during turns.
  • Left wing rotates counterclockwise: Better discharge of material. Picks up tractor tracks.
  • 11" Deck height: Handles heavy cutting, which reduces balling-up of cut material under the deck.
  • 10 Gauge Stump jumper backed with a 1" thick mounting bar: Allows cutter to slide over obstructions protecting gearbox output shaft & bottom seal.
  • 10 Gauge smooth deck top: Reduces accumulation of debris and is easier and faster to clean.
  • 3/16" Plate side skirt: Reduces debris piercing possibilities.
  • Self-leveling hitch: Reduces drawbar wear by keeping hitch level while going through ditches.
  • Low hitch weight: Less drawbar wear. Less ballast required. Works well with lighter tractors.
  • Single remote hydraulics: Easy to operate. Fits most tractors, only one duplex outlet required.
  • Hinged wing sections: Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches and hollows can cause uneven cutting.
  • 7/8" Solid hinge rods: Gives great strength to the cutter from front to rear, and in the hinge area itself.
  • Wing transport locks: Holds transport wings in the folded-up position in case of hydraulic pressure loss.
  • Enclosed front to rear dual leveling rods: Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
  • 5-Bolt hubs: 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
  • Drain holes in wheel rims: Allows water to drain from wheels mounted on folded-up wings. Helps prevent paint deterioration and rusting to the wheel rims.
  • Spring-cushioned lift cylinder: Cushions loads on drawbar.
  • Replaceable wheel spindles: Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove one bolt to replace damaged spindle.
  • 7/8" Leveling rods: Large diameter leveling rods provide superior supporting strength over rough terrain.
  • Airplane tires with flotation lip: Gives better cushion while transporting and provides flotation in soft ground.
Specifications
  • PTO Horsepower: 40-100 hp
  • Gearbox Horsepower - Splitter: 160 hp
  • Gearbox Horsepower - Center & Wings: 100 hp
  • Gearbox Shafts - Input Shaft: 1 3/8 in. 6 Spline
  • Gearbox Shafts - Output Shaft: 1 1/2 in.
  • Gear Box Capacity & Lubrication - Splitter: 4.5 pints of gear lube 80-90W EP
  • Gear Box Capacity & Lubrication - Center & Wings: 4 pints of gear lube 80-90W EP
  • Cutting Capacity: 1 1/2 in.
  • Hitch Weight: 793 lb.
  • Machine Weight: 2,540 lb.
  • Blade Tip Speed At 540 RPM: Center Blades = 16,500 FPM; Wing Blades = 16,000 FPM
  • Hitch Types: LP Performance hitch and swivel hitch
  • Hitch Jack: Standard (2,000 lb.)
  • Cutting Width: 12 ft. -0 in.
  • Overall Cutting Width: 12 ft. -7 in.
  • Minimum Transport Width: 7 ft. - 11 in. With front cutting blade 1 1/2 in. off the ground.
  • Overall Length: 13 ft. -3 in.
  • Deck Height: 11 in.
  • Cutting Height: 1 1/2 in. to 12 in.
  • Lift Hydraulics: 2 1/2 in. x 8 in. hydraulic cylinder, hoses, fittings & stroke control spacers
  • Wing Folding Hydraulics: 2 in. x 8 in. hydraulic cylinders, hoses & fittings
  • Wing Flex: 22 deg. Down and 45 deg. up while cutting.
  • Wing Transport Protection: Wing transport locks
  • Deck Material: 10 Gauge deck
  • Side Skirt Material: 3/16 in. Plate
  • Skid Shoes: Wing Deck: 1 replaceable per wing; Center Deck: 2 replaceable shoes
  • Blade Rotation - Left Wing: Counterclockwise
  • Blade Rotation - Center Deck: Counterclockwise
  • Blade Rotation - Right Wing: Clockwise
  • Blades - 6 (2 per deck): 1/2 in. x 3 in. Heat Treated Free Swinging Alloy Steel with up lift
  • Blade Overlap: 6 in.
  • Blade Bolt: Keyed with hardened flat washer & lock nut
  • Stump Jumper / Blade Holder: 10 Gauge round dish shaped pan, reinforced with 1 in. x 3 1/2 in. blade bar
  • Front & Rear Guards: Single chain
  • Input Driveline: Category 4 with constant velocity u-joint
  • Intermediate & Wing Drivelines: Category 3 with slip-clutch
  • Wheels: 20.5 in. x 6.75 in. x 10 in. used Aircraft Tires or 21 in. laminated wheels
  • Number of Wheels: 4 - Wheels: 2 on transport axle and one on each wing axle
  • Transport Axle: Spring-cushioned lift cylinder
  • Hubs: Cast iron five-bolt hubs with tapered roller bearings and 1 3/4 in. shafts.
  • Colors: Standard color: Beige; Optional colors: Red, Green or Orange

Promotions


Related Products